Jafner/homelab

Joey Hafner a85635d57f

Deploy to Fighter / Deploy (push) Successful in 7s

Details

Deploy to Fighter / Notify (push) Successful in 1s

Details

Document NUT setup

2024-02-28 02:06:09 -08:00

1.1 KiB

Raw Blame History

NUT Configuration Details

sudo apt-get install nut
lsusb to get ID of UPS over USB, returned Bus 001 Device 005: ID 0463:ffff MGE UPS Systems UPS
sudo nano /etc/nut/ups.conf. Add to bottom of file:

[EATON5PX1500RT]
driver = usbhid-ups
desc = "5PX1500RT"
port = auto
vendorid = 0463
productid = ffff

sudo nano /etc/nut/upsd.conf. Add to bottom of file: LISTEN 0.0.0.0 3493.
sudo nano /etc/nut/upsd.users. Add to bottom of file (replace with strong password):

[upsmon]
  password = <PASSWORD>
  upsmon primary

sudo nano /etc/nut/upsmon.conf. Add to bottom of file (replace with password from step 5.): MONITOR EATON5PX1500RT@localhost 1 upsmon <PASSWORD> primary
sudo nano /etc/nut/nut.conf. Find line with MODE=none and replace with MODE=netserver.
sudo systemctl restart nut-server.service.
sudo systemctl restart nut-monitor.service.
upsc EATON5PX1500RT to get printout of current data from UPS.

Done!

Followed this guide.