49 lines
2.0 KiB
Markdown
49 lines
2.0 KiB
Markdown
# NAS
|
|
The NAS is relied upon for many other hosts on the network, which need to be offlined before the NAS can be shut down.
|
|
1. Determine which service stacks rely on the NAS by running `grep -rnwli ~+ -e '/mnt/media\|/mnt/torrenting\|/mnt/calibre'` from the root of the `homelab` repo.
|
|
2. `docker-compose down` the stacks which rely on the NAS
|
|
3. `cat /etc/fstab` to get the list of mount points which rely on the NAS
|
|
4. For each NAS mount, run `sudo umount` for that share.
|
|
5. Offline the NAS. Press the physical power button on the NAS.
|
|
6. Perform necessary maintenance, then reboot the NAS.
|
|
7. After the NAS WebUI is available, SSH into the server and run `sudo mount -a`
|
|
8. Online the stacks affected by step 2.
|
|
|
|
# Seedbox
|
|
1. Stop all Docker containers with `docker stop $(docker ps -aq)`.
|
|
2. Reboot the host with `sudo reboot now`.
|
|
3. When the host has finished booting, re-mount all NAS shares defined in `/etc/fstab` with `sudo mount -a`.
|
|
4. Start all Docker containers with `docker start $(docker ps -aq)`.
|
|
|
|
# Server
|
|
1. Stop all Docker containers with `docker stop $(docker ps -aq)`.
|
|
2. Reboot the host with `sudo reboot now`.
|
|
3. When the host has finished booting, re-mount the NAS SMB shares defined in `/etc/fstab` with `sudo mount -a`
|
|
4. Start all Docker containers with `docker start $(docker ps -aq)`.
|
|
|
|
# Router
|
|
The router is relied upon by all clients on the network, so they all need to be offlined or prepared.
|
|
1. Offline the seedbox.
|
|
2. Offline the server.
|
|
3. Offline the NAS.
|
|
4. Run `shutdown`.
|
|
|
|
# PiHole
|
|
The PiHole is relied upon for DNS resolution for all devices on the network which have not manually configured another DNS resolver.
|
|
1. Log into `router` via SSH and run the following:
|
|
```
|
|
configure
|
|
delete system name-server 192.168.1.22
|
|
set system name-server 1.1.1.1
|
|
commit; save; exit
|
|
```
|
|
2. Reboot the Pi with `sudo reboot now`
|
|
3. Switch back to the router and run the following:
|
|
```
|
|
configure
|
|
delete system name-server 1.1.1.1
|
|
set system name-server 192.168.1.22
|
|
commit; save; exit
|
|
```
|
|
4. Done.
|