homelab/wizard

Port Forwarding Rules

Rule	Incoming Port	Protocol	Docs
Plex	32400	Both	support.plex.tv
BitTorrent	51000-51999	Both	wikipedia.org
WireGuard	53820	Both	wireguard.com
Minecraft	25565	Both	portforward.com
Iperf	50201	Both	iperf.fr
http/s	80,443	Both	wikipedia.org
Peertube Live	1935	Both	joinpeertube.org
Git SSH	2228-2229	Both	gitlab.com

Non-Default Port Mappings

Some services have been configured to use non-standard port mappings. This is usually done to mitigate the risk of automated port-checking probes.

• BitTorrent. This range is used to distribute all bittorrent connections across a wide range of high-number ports. See deluge configuration for more information about what port ranges go to which torrent clients.
• Wireguard. This was set to a non-standard port-mapping before I learned WireGuard doesn't respond to unauthenticated packets, which makes this unnecessary.
• Iperf. Iperf defaults to port 5201, which is not a high-number port. Since it is unauthenticated, I use a non-default, high-number port instead.
• Git SSH. I use a non-default port for my GitLab SSH server to minimize potential conflicts with other services on the network. It is important to be able to access the GitLab instance over SSH outside the network.

DNS Resolution Structure

graph TD;
    Client --> Router;
    Router --> PiHole;
    PiHole -- Ad --> /dev/null;
    PiHole -- Real --> Cloudflare;

DHCP Configuration Parameters

Parameter	Value
DHCP Name	LAN1
Subnet	192.168.1.0/24
Lease Pool	192.168.1.100-254/24
Router	192.168.1.1
DNS1	192.168.1.1
DNS2	-
Domain	local
Lease TTL	86400 seconds

Static DHCP Mappings

On the VyOS router, enter configuration mode with configure, then run show service dhcp-server shared-network-name LAN subnet 192.168.1.0/24 static-mapping (assuming you use the network name "LAN" and the subnet "192.168.1.0/24").

static-mapping U6-Lite {
    ip-address 192.168.1.3
    mac-address 78:45:58:67:87:14
}
static-mapping UAP-AC-LR {
    ip-address 192.168.1.2
    mac-address 18:e8:29:50:f7:5b
}
static-mapping joey-desktop {
    ip-address 192.168.1.100
    mac-address 04:92:26:DA:BA:C5
}
static-mapping joey-nas {
    ip-address 192.168.1.10
    mac-address 40:8d:5c:52:41:89
}
static-mapping joey-server {
    ip-address 192.168.1.23
    mac-address 70:85:c2:9c:6a:16
}
static-mapping joey-server2 {
    ip-address 192.168.1.24
    mac-address 24:4b:fe:57:bc:85
}
static-mapping joey-server3 {
    ip-address 192.168.1.25
    mac-address 78:45:c4:05:4f:21
}
static-mapping joey-server4 {
    ip-address 192.168.1.26
    mac-address 90:2b:34:37:ce:e8
}
static-mapping joeyPrinter {
    ip-address 192.168.1.60
    mac-address 9c:32:ce:7c:f8:25
}
static-mapping pihole {
    ip-address 192.168.1.22
    mac-address b8:27:eb:3c:8e:bb
}
static-mapping raspi2 {
    ip-address 192.168.1.21
    mac-address b8:27:eb:ff:76:6e
}
static-mapping tasmota-1 {
    ip-address 192.168.1.50
    mac-address 3C:61:05:F6:44:1E
}
static-mapping tasmota-2 {
    ip-address 192.168.1.51
    mac-address 3c:61:05:f6:d7:d3
}
static-mapping tasmota-3 {
    ip-address 192.168.1.52
    mac-address 3c:61:05:f6:f0:62
}

Get Currently Configured Hairpin NAT Address

configure
show nat destination rule 1100 destination address

CLI Reference

• EdgeOS User Guide PDF
• EdgeOS is built on Vyatta
• To make configuration changes in the CLI, run configure, make the changes (e.g. set interfaces ethernet eth0 dhcpv6-pd pd 0 interface eth1), then save the changes with commit; save; exit.

Configure SSH Keys

Via: https://thehomeofthefuture.com/how-to/use-an-ssh-key-with-an-ubiquiti-edgerouter/

Via WebUI

1. Navigate to the Config Tree
2. Dig down to system / login / user / admin / authentication / public-keys /
3. Add a new "public-keys" value with the name of the key.
4. Refresh the tree and open the newly-created sub-directory named after the key.
5. Add the key information here. Leave "options" empty. Omit ssh-rsa and the comment from the key, place the type in the "type" field.
6. Click "Preview" then "Apply"

Via SSH

1. SSH into system
2. configure

set system login user admin authentication public-keys jafner425@gmail.com
set system login user admin authentication public-keys jafner425@gmail.com type ssh-rsa
set system login user admin authentication public-keys jafner425@gmail.com key $KEY_VALUE

4. commit; save; exit

Check Traffic by TCP Connection

To get a monitoring panel of bandwidth usage listed by connection on the internet, use sudo iftop -i pppoe1. To instead get usage listed by connection on LAN, use sudo iftop -p -i eth6

iftop docs. Use [pcap-filter'](https://www.tcpdump.org/manpages/pcap-filter.7.html) syntax for filtering with the -f` flag.

Setting up the Aruba S2500-48P

Followed the instructions given in this video

1. Reset to factory settings.
2. Basic configuration (using static IP 192.168.1.9).
3. Flashed new firmware image (7.4.0.7, built 2021_07_07) to default boot partition.
4. Deleted stacking interfaces for 3rd and 4th SFP+ ports.
5. Flashed new firmware image (7.4.0.7, built 2021_07_07) to backup boot partition.

Additional reference: https://forums.serverbuilds.net/t/official-aruba-s2500-managed-ethernet-switch-poe-10gsfp/5038